Try all possible statuses of the clean water tank

Oct 13, 2025 by miodeya.com 31 views

Introduction

The DreameVacuumCleanWaterTankStatus sensor is a crucial component of the Dreame X50 vacuum cleaner, providing users with real-time information about the clean water tank's status. However, some users have reported issues with the sensor not working as expected. In this article, we will delve into the problem, explore possible causes, and provide a step-by-step guide to troubleshoot and resolve the issue.

Describe the Bug

The newly added DreameVacuumCleanWaterTankStatus seems to be malfunctioning, at least for the X50 model. Users have reported that the sensor is not accurately detecting the clean water tank's status, leading to incorrect readings and potential issues with the vacuum's performance.

To Reproduce

To reproduce the issue, follow these steps:

Try all possible statuses of the clean water tank: Remove the clean water tank, empty it, and fill it to the brim. Check the status value displayed on the device.
Verify the sensor's accuracy: Compare the sensor's readings with the actual status of the clean water tank.

Expected Behavior

Before the recent update, users could manually select the clean water tank's status from their device, and the resulting mapping was as follows:

class DreameVacuumCleanWaterTankStatus(IntEnum):
    """Dreame Vacuum clean water tank status"""

    INSTALLED = 0
    NOT_INSTALLED = 1
    LOW_WATER = 2

Screenshots

Troubleshooting Steps

To resolve the issue with the DreameVacuumCleanWaterTankStatus sensor, follow these troubleshooting steps:

Step 1: Check the Device's Firmware

Ensure that your device's firmware is up-to-date. Outdated firmware can cause compatibility issues with the sensor.

Step 2: Verify the Sensor's Configuration

Check the sensor's configuration in the Home Assistant app. Ensure that the sensor is properly configured and that the correct mapping is selected.

Step 3: Reset the Sensor

Reset the sensor to its default settings. This may resolve any issues caused by incorrect configuration or firmware glitches.

Step 4: Check for Interference

Check for any potential sources of interference that may be affecting the sensor's accuracy. This can include other devices in the vicinity or physical obstructions.

Step 5: Contact Support

If none of the above steps resolve the issue, contact the manufacturer's support team for further assistance. They may be able to provide additional troubleshooting steps or repair or replace the device.

Additional Information

Model Name: dreame.vacuum.r2532a
Home Assistant Version: 2025.3.1
Configuration Type: With maps
Errors or warnings shown in the HA logs (if applicable): None

Conclusion

Introduction

The DreameVacuumCleanWaterTankStatus sensor is a crucial component of the Dreame X50 vacuum cleaner, providing users with real-time information about the clean water tank's status. However, some users have reported issues with the sensor not working as expected. In this article, we will address some of the most frequently asked questions (FAQs) related to the X50 clean water sensor.

Q: What is the DreameVacuumCleanWaterTankStatus sensor?

A: The DreameVacuumCleanWaterTankStatus sensor is a component of the Dreame X50 vacuum cleaner that provides real-time information about the clean water tank's status.

Q: Why is my DreameVacuumCleanWaterTankStatus sensor not working?

A: There are several possible reasons why your DreameVacuumCleanWaterTankStatus sensor may not be working. These include:

Outdated firmware
Incorrect configuration
Interference from other devices
Physical obstructions

Q: How do I troubleshoot my DreameVacuumCleanWaterTankStatus sensor?

A: To troubleshoot your DreameVacuumCleanWaterTankStatus sensor, follow these steps:

Check the device's firmware
Verify the sensor's configuration
Reset the sensor to its default settings
Check for interference
Contact the manufacturer's support team for further assistance

Q: What are the possible causes of the DreameVacuumCleanWaterTankStatus sensor not working?

A: The possible causes of the DreameVacuumCleanWaterTankStatus sensor not working include:

Outdated firmware
Incorrect configuration
Interference from other devices
Physical obstructions
Manufacturing defects

Q: How do I reset my DreameVacuumCleanWaterTankStatus sensor?

A: To reset your DreameVacuumCleanWaterTankStatus sensor, follow these steps:

Go to the Home Assistant app
Navigate to the sensor's settings
Select the "Reset" option
Confirm the reset

Q: What should I do if my DreameVacuumCleanWaterTankStatus sensor is still not working after troubleshooting?

A: If your DreameVacuumCleanWaterTankStatus sensor is still not working after troubleshooting, contact the manufacturer's support team for further assistance. They may be able to provide additional troubleshooting steps or repair or replace the device.

Q: Is the DreameVacuumCleanWaterTankStatus sensor compatible with my device?

A: The DreameVacuumCleanWaterTankStatus sensor is compatible with the Dreame X50 vacuum cleaner. However, it is essential to check the device's specifications to ensure compatibility.

Q: Can I update the firmware of my DreameVacuumCleanWaterTankStatus sensor?

A: Yes, you can update the firmware of your DreameVacuumCleanWaterTankStatus sensor. However, it is essential to follow the manufacturer's instructions to avoid any potential issues.

Conclusion

The DreameVacuumCleanWaterTankStatus sensor is a critical component of the Dreame X50 vacuum cleaner. However, some users have reported issues with the sensor not working as expected. By addressing the frequently asked questions (FAQs) related to the X50 clean water sensor, we hope to provide users with a better understanding of the issue and the necessary steps to resolve it. If you have any further questions or concerns, please do not hesitate to contact the manufacturer's support team for further assistance.