The Importance of Vacuum Chamber in Degassing Process

Oct 13, 2025 by miodeya.com 20 views

Introduction

The development of a prototype is a crucial step in the product development process, and it is especially important when creating a vacuum chamber for making Mold Silicone Rubber RTV 683. A prototype is designed to enable users and makers to make the necessary changes before entering into mass production. In this context, the technology used is Lost Wax Casting, where the mold material used is Silicone Rubber RTV 683. To ensure the resulting mold is free from air cavities, an efficient degassing process is needed, which will be helped by the presence of a vacuum chamber.

The Importance of Vacuum Chamber in Degassing Process

A vacuum chamber plays a vital role in creating a vacuum condition needed in the degassing process. The vacuum chamber tube has a significant influence on the performance of this process, especially related to the volume and resistance of the tube material in holding vacuum pressure between -0.6 to -0.8 bar. In the design of a vacuum chamber tube, the material used is stainless steel 304 with a composition of 18% chromium and 8% nickel. The process of calculating the thickness of the tube is based on the pressure, volume, and permitted voltage, and the calculation shows that the nominal thickness required is 0.696 mm. However, due to difficulties in the procurement of materials with the thickness, finally, the thickness of 1 mm was chosen.

Design and Manufacture of Vacuum Chamber Tube

The design and manufacture of a vacuum chamber tube require careful consideration of several factors, including the material used, the thickness of the tube, and the volume of the chamber. The material used for the vacuum chamber tube is stainless steel 304, which is known for its high strength, corrosion resistance, and ability to withstand high temperatures. The thickness of the tube is critical in determining the performance of the vacuum chamber, and it is calculated based on the pressure, volume, and permitted voltage. In this case, the nominal thickness required is 0.696 mm, but due to difficulties in procurement, the thickness of 1 mm was chosen.

Degassing Process and Its Importance

The degassing process is a critical step in the production of Mold Silicone Rubber RTV 683, and it is essential to ensure that the resulting mold is free from air cavities. The test results show that the optimum time for the gas removal process is for 120 seconds, with a stable vacuum strength in the range of -0.6 to -0.8 bar. The volume of the mold used in this experiment is 20 cm³ with a width of 5 cm and a thickness of 2 cm. Thus, the vacuum chamber designed not only serves to minimize defects in the product but also provides efficiency in the time and production process.

Conclusion

From this whole process, it can be concluded that the development of the right vacuum chamber will have a big impact on the quality of the final product. Innovation in the design and manufacture of a vacuum chamber tube is very important to ensure the process of making Mold Silicone Rubber runs optimally. Success in designing and producing this tool will also open up opportunities for the use of Lost Wax Casting techniques in various other industrial fields, creating high-quality products that meet user standards and expectations.

Future Work

Future work in this area could involve further optimization of the vacuum chamber design, including the use of more advanced materials and manufacturing techniques. Additionally, the development of a more efficient degassing process could be explored, potentially using new technologies or techniques. Finally, the application of Lost Wax Casting techniques in various other industrial fields could be investigated, with a focus on creating high-quality products that meet user standards and expectations.

Recommendations

Based on the results of this study, the following recommendations can be made:

The use of stainless steel 304 as the material for the vacuum chamber tube is recommended due to its high strength, corrosion resistance, and ability to withstand high temperatures.
The thickness of the tube should be carefully calculated based on the pressure, volume, and permitted voltage to ensure optimal performance.
The degassing process should be optimized to ensure that the resulting mold is free from air cavities and that the process is efficient in terms of time and production.
Further research and development should be conducted to explore the application of Lost Wax Casting techniques in various other industrial fields.

Limitations

This study has several limitations, including:

The use of a single material (stainless steel 304) for the vacuum chamber tube, which may not be suitable for all applications.
The calculation of the tube thickness based on a single set of parameters (pressure, volume, and permitted voltage), which may not be representative of all scenarios.
The limited scope of the study, which focused on a single type of mold material (Mold Silicone Rubber RTV 683) and a single type of casting technique (Lost Wax Casting).

Future Directions

Future research in this area could involve:

Exploring the use of more advanced materials and manufacturing techniques for the vacuum chamber tube.
Developing more efficient degassing processes, potentially using new technologies or techniques.
Investigating the application of Lost Wax Casting techniques in various other industrial fields, with a focus on creating high-quality products that meet user standards and expectations.

Conclusion

In conclusion, the design and manufacture of a vacuum chamber for making Mold Silicone Rubber RTV 683 is a critical step in the production process. The development of a right vacuum chamber will have a big impact on the quality of the final product, and innovation in the design and manufacture of a vacuum chamber tube is very important to ensure the process of making Mold Silicone Rubber runs optimally.

Frequently Asked Questions

Q: What is the purpose of a vacuum chamber in the process of making Mold Silicone Rubber RTV 683?

A: The purpose of a vacuum chamber is to create a vacuum condition needed in the degassing process, which is essential to ensure that the resulting mold is free from air cavities.

Q: What material is used for the vacuum chamber tube?

A: The material used for the vacuum chamber tube is stainless steel 304, which is known for its high strength, corrosion resistance, and ability to withstand high temperatures.

Q: How is the thickness of the vacuum chamber tube calculated?

A: The thickness of the vacuum chamber tube is calculated based on the pressure, volume, and permitted voltage. In this case, the nominal thickness required is 0.696 mm, but due to difficulties in procurement, the thickness of 1 mm was chosen.

Q: What is the optimum time for the gas removal process?

A: The test results show that the optimum time for the gas removal process is for 120 seconds, with a stable vacuum strength in the range of -0.6 to -0.8 bar.

Q: What is the volume of the mold used in this experiment?

A: The volume of the mold used in this experiment is 20 cm³ with a width of 5 cm and a thickness of 2 cm.

Q: What are the benefits of using a vacuum chamber in the process of making Mold Silicone Rubber RTV 683?

A: The benefits of using a vacuum chamber include minimizing defects in the product, providing efficiency in the time and production process, and creating high-quality products that meet user standards and expectations.

Q: What are the limitations of this study?

A: The limitations of this study include the use of a single material (stainless steel 304) for the vacuum chamber tube, the calculation of the tube thickness based on a single set of parameters (pressure, volume, and permitted voltage), and the limited scope of the study.

Q: What are the future directions for this research?

A: Future research in this area could involve exploring the use of more advanced materials and manufacturing techniques for the vacuum chamber tube, developing more efficient degassing processes, and investigating the application of Lost Wax Casting techniques in various other industrial fields.

Q: What are the recommendations for future work?

A: The recommendations for future work include further optimization of the vacuum chamber design, the development of a more efficient degassing process, and the application of Lost Wax Casting techniques in various other industrial fields.

Q: What are the potential applications of Lost Wax Casting techniques in various other industrial fields?

A: The potential applications of Lost Wax Casting techniques in various other industrial fields include creating high-quality products that meet user standards and expectations, such as in the production of medical devices, aerospace components, and automotive parts.

Q: What are the benefits of using Lost Wax Casting techniques in various other industrial fields?

A: The benefits of using Lost Wax Casting techniques in various other industrial fields include creating complex geometries, reducing material waste, and increasing production efficiency.

Q: What are the challenges associated with using Lost Wax Casting techniques in various other industrial fields?

A: The challenges associated with using Lost Wax Casting techniques in various other industrial fields include ensuring the accuracy and precision of the casting process, managing the complexity of the casting design, and controlling the quality of the final product.

Q: What are the future prospects for the use of Lost Wax Casting techniques in various other industrial fields?

A: The future prospects for the use of Lost Wax Casting techniques in various other industrial fields are promising, with the potential for increased adoption and application in various industries, including aerospace, automotive, and medical devices.